The perfect solution for keeping your guitar and amp pots, faders, switches, tube sockets and much much more clean and rejuvanated.
DeoxIT D-Series – Contact Cleaner & Rejuvenator
Part No. D5S-6-LMH
5 Ounce can
Original Low-Med-High Adjustable Valve
Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part Nos. DN5S-2N and DN5S-6N.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT dissolves the contamination and protects the surface.
For reference, DeoxIT has approximately 20% cleaning action.
• Improves Conductivity
• Deoxidizes, Cleans and Preserves
• Reduces Intermittent Connections
• Reduces Arcing & RFI
• Reduces Wear & Abrasion
• * Temperature Range, -34 C (-29 F) to +200 C (400 F)
* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer